The Aries OmniMechs are IN STOCK!

Well, it has been a long time in coming, and all but a couple pre-orders have shipped as we are waiting to hear back from a couple people...but it is time! The Aries OmniMechs are now IN STOCK!!! There were a few production issues with some damaged torsos & the B Variant is missing the right arm...but they are now IN STOCK in the store! Once we receive the replacement torsos for the ones that had major bubbles, and the B Variant arms...we will re-update the stock status, but this could be a month or two before they arrive.

Click Aries OmniMech Selections to be taken to the product listings!

Due to some of the production issues, especially on the G Variant, and a very tiny amount on the K Variant, there is a possibility that they will be discontinued. This is due to the brittle nature of the small Medium Pulse Lasers. On the G Variant there is one in the Head, and in the Center Torso, and they break off pretty easily. As such, we are including the AC-012 Flight Base Rod at no charge. If you order this variant, and it is damaged in shipping, simply cut the rod to length and drill it into the torso and you're all set. On the K, which had very minimal issues, the Medium Pulse Laser is only mounted in the head. This could still be an issue, but not to the same extent as the G Variant. As such, no extra rod will be included. If you have an issue with the K Variant, it was in all cases a clean break and could be glued back on with no issues. If you still have a problem, then please contact us so we can resolve it for you.

Thank you very much for your extended patience on this project. It was a MAJOR learning experience for us, and we have learned a lot. The next round of minis, which were designed by Stephen Huda from the Catalyst artist team, will go much smoother!